manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 318

Maintenance of the knitting machine  

6 

Cleaning the knitting machine  6.2 

314

6.2.9

Cleaning fan and radiators in right control unit

1. Switch off the machine and wait until the machine is currentless.

2. Swing open the cover on the right-hand control unit.

Control unit

3. Vacuum-off and blow-out the fan (1) and heat sink (2).

4. Close the cover on the right control unit.

5. Switch on machine.

6.2.10

Cleaning filter mat of power supply unit

1. Swing open the cover on the left control unit.

Fan power supply unit

2. Remove screw (1) and hinge down the housing toward the front.

3. Remove filter mat and blow it out with compressed air.

4. If heavy soiling is present, vacuum off and blow out the radiator (2).

5. Replace filter mat.

6. Swing in the cover on the left control unit.

The fan is temperature-controlled.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands