manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 149

145

4 

 

Adjusting knitting machine 

4.1  Basic settings 

Linking a field to a value

   

Linking a field to a value:

1. Call up the "Changeable monitoring" window from the "Main menu".

2. Touch a white field with a frame. The setting window appears.

Window for linking a field

3. Select the type of the value in the left column.

4. Select the value in the right column.

The selected value is displayed in the lower line.

5. Confirm entries.

6. If necessary, link further fields to a value.

7. Call up "Main menu".

Key

Function

Call up the "Changeable monitoring" window

Call up "Additional function keys"

"Automatic configuration"

"Clear all fields" (reset)

End setting process and save changes

End setting process without saving changes

Call up "Main menu"

Keys for linking a field

If only one value is to be deleted, select the empty (white) 
field above "RS".

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands