manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 341

337

7 

 

Repairing the knitting machine 

7.3  Replacing parts 

7.3.1

Replacing needle and coupling part

Replacing needle and coupling part

1. Pull-out the needle rail (1) with the extraction hook (6).

2. Pull needle (2) upwards, the coupling part (3) will, with it, also be pulled 

upwards.

3. When the butt of the coupling parts (4) bumps into the holding-down 

jack bed, press the coupling part downward. Pull out the needle and 
coupling part upward.

4. Assemble the new needle and coupling part.

5. To mount the new needle and coupling part, push the butt of the 

coupling part through into the needle bed under the jack bed. While 
doing so, make sure that the needle is guided in above the knock-over 
wire.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands