Stoll CMS 730 S Operating Instructions Manual Download Page 429

Page: 429 / 468

425

Software - Installation and basic settings

8.4 Installing the Stoll operating system

7. If necessary, change the data and confirm the changes.

8. Proceed to the next window.



The "Machine Parameter" window is displayed. The data is set at
the factory.

9. If necessary, change the data and confirm the changes.

10. Proceed to the next window.



The "Needle bed parameters" window is displayed. The data is set
at the factory.

11. If necessary, change the data and confirm the changes.

12. Proceed to the next window.



The "NPK-Values" window is displayed. The data is set at the
factory.

13. If other NPK values are to be used, change the values and confirm the

changes.

14. Proceed to the next window.



The "Knit Report Configuration" window is displayed.

15. If other settings are to be used, change the settings and confirm the

changes. Use the "additional function keys" to activate/deactivate the
running time control and/or running time measurement.

16. Proceed to the next window.



The configuration is complete.



The "Reference runs" window is displayed.

17. Carry out reference run(s).

18. Proceed to the next window.



The restart is complete and the "Main menu" is displayed.



The machine is ready to knit.

Further information:



Setting touch screen [-> 63]



Setting machine parameters [-> 167]



Setting waiting time until warm start [-> 393]



Configure machine [-> 394]



Configuring network [-> 396]

Machine fault!



The presence or lack of machine options must correctly be
specified, as otherwise a fault may occur on the machine.



Always specify the machine options correctly.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands