manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 363

359

7 

 

Repairing the knitting machine 

7.3  Replacing parts 

4. Remove the screws (4) for the defective gear rack.

5. Remove carefully the guide strip (5) and the gear rack.

6. Replace defective gear rack.

7. Mount the new gear rack and the guide bars.

8. Check whether the gear racks are positioned correctly. For this 

purpose, turn the positioning disk (1) to the home position (6 o'clock).

The gear racks must be aligned.

9. If this is not the case, repeat steps 2 till 8.

The gear rack is replaced.

Type 2

   

Replacing gear racks:

1. Take off the step motor.

2. Rotate positioning disk (7) to the home position (6).

Step motor home position

Valid for:

CMS 530, CMS 520, CMS 822, CMS 933

E5 │ E7 │ E8 │

E2,5.2

│

E3,5.2

│

E5.2

CMS 740, CMS 730 T, CMS 530 T, CMS 502, CMS 830 C, CMS 520 C

all gauges

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands