manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 367

363

7 

 

Repairing the knitting machine 

7.3  Replacing parts 

7.3.12

Mount intarsia yarn carrier *

Combination possibilities for normal and Intarsia yarn carriers:

   

Normal 
yarn 
carrier 
type 1

Normal and intarsia yarn carriers can be used side by side but 

not

 on 

the same track.

Basis: The disengaging arms (1) of the normal yarn carrier collide with 
the intarsia yarn carrier or the yarn carrier limiter.

The combination possibilities:

Each combination can be used with itself or with another combination.

: Equip the yarn carrier tracks from inward to outward.

With the allocation from inward to outward no track must be kept empty 
when using intarsia and normal yarn carriers.

Normal 
yarn 
carrier 
type 2

Normal yarn carriers type2 and intarsia yarn carriers can be used 
together on the same track.

The combination possibilities:

You can equip the yarn carrier rails as desired.

You can equip all the tracks.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands