Stoll CMS 730 S Operating Instructions Manual Download Page 428

Page: 428 / 468

Software - Installation and basic settings

Installing the Stoll operating system 8.4

424

8.4.5

Carrying out restart with machine configuration
(Restart and Configuration)

A restart with the machine configuration is carried out after a gauge
conversion or after attaching special attachments.

Carry out restart with machine configuration:

✔

The machine is switched off.

1. To switch on the machine, set the main switch to



The "BootOkc" window is displayed on the touch screen.



"BootOkc" window

2. For the automatic warm start within the waiting time tap on the "Restart

and Configuration" key.



The Restart Process gets started.



After the process is shut, the "Language" window is displayed.

3. Select the dialog language and confirm the selection.

4. Proceed to the next window.



The "Machine configuration" window is displayed. The data have
been set at the factory and will not be changed.

5. Proceed to the next window.



The "Machine configuration 2" window is displayed. The data have
been set at the factory and will not be changed.

6. Proceed to the next window.



The "Machine Options" window is displayed. The data is set at the
factory.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands