Stoll CMS 730 S Operating Instructions Manual Download Page 427

Page: 427 / 468

423

Software - Installation and basic settings

8.4 Installing the Stoll operating system

8.4.4

Carrying out a restart (Restart)

A restart is carried out when the software no longer reacts to inputs
following an error.

Carry out a restart:

1. Set machine main switch to



The switch-off process takes approx. 60 seconds. When the
process is complete, the touch screen becomes dark and a signal
sounds.

2. Set the main switch to



The "BootOkc" window is displayed on the touch screen.



"BootOkc" window

3. For the automatic warm start within the waiting time tap on the key

"Restart".



The machine is configured.



Finally the window "Reference runs " is displayed.

4. Carry out reference run(s).

5. Proceed to the next window.



The restart is complete and the "Main menu" is displayed.



The machine is ready to knit.

Further information:



Setting touch screen [-> 63]



Setting waiting time until warm start [-> 393]

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands