manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 415

411

8 

 

Software - Installation and basic settings 

8.4  Installing the Stoll operating system 

6. Confirm selection.

The installation process gets started.

The "Language" window is displayed after having selected the 
"Installation and Configuration" key.

- or - 

The "Reference runs " window is displayed after having selected the 
"Installation" key.

7. If the "Language" window is displayed, continue with the 

Machine 

configuration

 section.   

 - or - 

➜

If the "Reference runs" window is displayed, continue with the 

Start 

Reference runs

 section.

Configure machine

✔

The "Language" window is displayed.

1. Select the dialog language and confirm the selection.

2. Proceed to the next window.

The "Machine configuration" window is displayed. The data have 
been set at the factory and will not be changed.

3. Proceed to the next window.

The "Machine configuration 2" window is displayed. The data have 
been set at the factory and will not be changed.

4. Proceed to the next window.

The "Machine Options" window is displayed. The data is set at the 
factory.

5. If necessary, change the data and confirm the changes.

6. Proceed to the next window.

The "Machine Parameter" window is displayed. The data is set at 
the factory.

7. If necessary, change the data and confirm the changes.

8. Proceed to the next window.

The "Needle bed parameters" window is displayed. The data is set 
at the factory.

9. If necessary, change the data and confirm the changes.

10. Proceed to the next window.

The "NPK-Values" window is displayed. The data is set at the 
factory.

Machine fault!

The presence or lack of machine options must correctly be 
specified, as otherwise a fault may occur on the machine.

Always specify the machine options correctly.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands