manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 49

45

2 

 

Description of knitting machine 

2.8  Display and operating elements 

2.8.4

Input unit

Input unit

The input unit (1) enables communication with the machine control:

Display of operating data

Calling up help information

Changing machine settings and pattern data

Input of commands

The input unit can be moved over the entire width of the needle bed.

To carry out a function, tap one of the symbols (keys) on the touch screen. 
We recommend using the touch pen (2) to prevent the touch screen from 
becoming dirty or damaged.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands