manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 213

209

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

4.2.25

Normal yarn carrier type 2

Normal yarn carrier type 1

Normal yarn carriers and intarsia yarn carriers cannot be used on the same 
track.

Basis: The disengaging arms (1) of the normal yarn carrier collide with the 
intarsia yarn carrier or the yarn carrier limiter.

Possible combinations for normal yarn carriers type1 and type2:

Each combination can be used with itself or with another combination.

: Equip the yarn carrier tracks from inward to outward.

Normal yarn carrier type 2

That's why a new normal yarn carrier has been developed.

It has got no disengaging arms but lifters (2), similar to the intarsia yarn 
carrier. Thus, this yarn carrier can be used with intarsia yarn carriers on the 
same track.

The normal yarn carrier type 2 is used for:

"normal" knitting

The yarn carrier knits for example the 2x1 fabric start, and some intarsia 
yarn carriers are additionally located on the same rail.

You had to use an intarsia yarn carrier for the 2x1 fabric start so far (cost 
saving).

Plating with 2 yarn carriers. 

The normal yarn carrier type 2 is used for plating. This was not possible 
before.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands