manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 343

339

7 

 

Repairing the knitting machine 

7.3  Replacing parts 

Type 2

   

To replace the intermediate slider, you need a small pair of pliers.

Replacing the intermediate slider

1. Push the needle and coupling part (1) upward.

2. Push the intermediate slider (2) until the lower butt bumps into the cover 

rail (3).

3. Pull the upper butt of the intermediate slider out of the needle bed while 

pressing the lower butt into the needle bed and under the cover rail. 

4. Install the new intermediate slider in the reverse order.

5. Slide the needle and coupling part into the home position.

Valid for:

E5 │ E7 │ E8 

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands