manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 316

Maintenance of the knitting machine  

6 

Cleaning the knitting machine  6.2 

312

6.2.6

Cleaning the permanent brakes

Cleaning the permanent brake

➜

Clean both the brake settings of each permanent brake with a cloth. 

In case it is very dirty, then the permanent brake can be dismantled and can 
be blown out with compressed air.

1. Pull the adjusting lever of the permanent brake outwards and 

simultaneously press the lug of the permanent brake on the inner side 
of the safety door.

The permanent brake flaps underneath.

2. Blow out the permanent brake with the compressed air.

6.2.7

Cleaning the friction feed wheel *

Cleaning the friction feed wheel

1. Suck in the fluff and dust from the friction feed wheel.

2. Remove dirt (e. g. paraffin) from the friction rollers.

Further information:

Symbols in this document [-> 12]

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands