manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 72

Producing with the knitting machine  

3 

Threading up yarn  3.2 

68

3.2.3

Threading threads through yarn guide bracket

1. Push the yarn guide brackets to the side so that a yarn guide bracket 

hangs over each bobbin.

2. Thread each thread through a yarn guide bracket.

3.2.4

Threading threads through yarn control device

Path of the thread through the yarn control device

1. Bring thread break control in work position.

Pull thread break control a little towards left till it is not held by the 
stopping cam anymore.

2. Thread each thread through a yarn control device as shown in the 

picture.

3.2.5

Thread the yarns through the yarn length measuring 
device *

Path of the thread through the yarn length measuring device

➜

Push thread upward with both hands through the threading gap and lay 
it around the measuring wheel. 

Further information:

Symbols in this document [-> 12]

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands