manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 364

Repairing the knitting machine  

7 

Replacing parts  7.3 

360

3. Set at the rear the left pin of the lower gear rack guide.

Pin of gear rack guide

4. Push lower gear rack manually to the left until all gear racks can be 

removed.

5. Replace defective gear rack.

6. Set the installation position. For this purpose, turn the serrated lock 

washer (1) in such a way that the right edge is positioned somewhat in 
front of the light barrier (2). (visually expressed: if this setting were on a 
clock, the time would be: 11:58)

Built-in position

7. In this installation position, push in the gear rack (3) from the left until 

light resistance can be felt.

The gear rack contacts the pinion.

8. Push in gear rack (5) as well.

9. Push in gear rack (4) from the right until light resistance can be felt.

The gear rack contacts the pinion.

10. Push gear racks (3) and (4) inward evenly.

Gear rack (5) is automatically pulled inward when gear rack (4) is 
pushed.

11. Check whether the gear racks are positioned correctly. For this 

purpose, turn the positioning disk (7) to the home position (6).

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands