manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 342

Repairing the knitting machine  

7 

Replacing parts  7.3 

338

7.3.2

Replacing intermediate slider

There are different models depending on the gauge.

Type 1

   

To replace the intermediate slider, you need a small pair of pliers.

Replacing the intermediate slider

1. Push the needle and coupling part (1) upward.

2. Using the pliers, pull the lower butt of the intermediate slider (2) 

downwards out of the needle bed while pressing the upper butt into the 
needle bed and pressing it under the cover rail (3).

3. Install the new intermediate slider in the reverse order.

4. Slide the needle and coupling part into the home position.

Valid for:

E10 │ E12 │ E14 │ E16 │ E18 │

E6.2

│

E7.2

│

E8.2

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands