manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 68

Producing with the knitting machine  

3 

Preparing production and shift changes  3.1 

64

The "Set touch screen" window appears.

"Set touch screen" window

3. Tap the "Calibrate" key.

The setting window appears. A target circle is located on the upper, 
left side.

Setting window with target circle

4. Tap exactly on the target circle.

A second target circle appears on the lower right-hand side.

5. Tap exactly on the target circle.

A third target circle appears on the upper, right-hand side.

6. Tap exactly on the target circle.

A message box appears. The request in the message box is not 
important, as there is no mouse cursor here.

7. Press on the "Yes" key.

8. Call up "Main menu".

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands