manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 75

71

3 

 

Producing with the knitting machine 

3.2  Threading up yarn 

3. Thread the thread vertically downwards in the eyelet (2) of the lateral 

yarn tensioner. For quicker orientation a vertically running riffle is 
attached in the safety door.

4. Feed the thread through the yarn deflector (3) to the yarn carrier.

5. Bring lateral yarn tensioner in work position.

6. With type 2: Pull the thread in the open eyelet (4) of the permanent 

brake.

3.2.8

Threading up yarns into yarn carrier

   

Threading up the threads into the 
respective next eyelet on the yarn 
carrier.

If several yarn carriers of one track are 
used and the threads are led to the yarn 
carriers from the same side.

If several bobbins are used for one yarn 
carrier.

Threading up yarns from left and 
right.

Make sure that almost the same 
number of threads are used from left 
and right.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands