manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 132

Adjusting knitting machine  

4 

Basic settings  4.1 

128

4.1.6

Adjusting yarn delivery on friction feed wheel *

The friction rollers have a constant peripheral speed and feed the maximum 
amount of thread consumed by the knitting machine. To adjust the yarn 
delivery to the actual consumption, the winding angle of the thread is 
modified. If the winding angle is enlarged, then the friction force increases 
and the friction feed wheel delivers more thread. The friction feed wheel 
should always feed somewhat more thread than the yarn carriers consume.

Depending on machine model and component type, there are different 
models of friction feed wheels.

Type 1

Adjusting the yarn delivery on the friction feed wheel

➜

If the yarn delivery is to be reduced, then lead the yarn through the 
eyelet (1). 

Type 2

Adjusting the yarn delivery on the friction feed wheel

Adjusting the yarn delivery:

1. Push the fixing device (1) toward the front.

2. If the yarn delivery is to be increased, turn the swivel bow (2) upward.   

 - or - 

➜

If the yarn delivery is to be reduced, turn the swivel bow (2) downward.

3. Push the fixing device (1) toward the rear.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands