manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 195

191

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

4.2.16

Adjusting yarn carrier guide

The yarn carrier guide must be adjusted if the yarn carrier can be lifted from 
the yarn carrier rail or a yarn carrier plunger is not put out of action.

Adjusting yarn carrier guide:

1. To check whether the yarn carrier can be lifted from the yarn carrier rail, 

take the left and right sides of the yarn carrier housing in both hands and 
move the yarn carrier housing upward and downward.

Adjusting yarn carrier guide

2. If necessary push the setting key inwards with the adjusting key from 

the accessories till the yarn carrier cannot be raised erect any more.

3. Turn the setting key back by one-eighth of a turn.

4.2.17

Adjusting the brushes of the central lubrication *

The brushes have been adjusted correctly if they touch the working butts 
lightly.

Brushes of the central lubrication

Adjusting the brushes of the central lubrication:

1. Release hexagon nut (2).

2. Adjust brushes on hexagon nut (1).

3. Retighten hexagon nut (2).

4. Adjust all brushes.

Further information:

Symbols in this document [-> 12]

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands