manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 224

Adjusting knitting machine  

4 

Advanced adjustments  4.2 

220

For replacing the knock-over wire you need a small pair of pliers.

1. Cast-off or transfer the stitches of the needle bed, which is converted.

2. Stop the carriage in the left reversing position.

3. Remove screw (3) on left and right-hand sides of jack bed. Use the 

special hexagon screwdriver from the accessories for this purpose.

4. Loosen the screw (4) on the left and right-hand sides of the jack bed.

5. Remove the limiter (5) on both sides.

6. Pull out the wire (1) with the pair of pliers.

7. Push in the wire in position (2).

8. Reassemble the needle bed in the reverse order.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands