manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 175

171

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

4.2.7

Copying service data

With this menu the service data can be copied on a data carrier.

"Copy service data" window

   

Label

Explanation

Copy Logfiles

If the machine computer has serious problems, e.g.. .  it does 
not react to any entries or the program crashes any longer, the 
cause is very important for Stoll. The computer saves the data 
up to the fault internally in so-called "Logfiles". These files can 
be saved and sent to the Stoll helpline so that Stoll can carry out 
an exact error diagnostics.

Copy Dongle

The machine settings do not only contain the machine data, but 
also the machine options, the machine configuration, the report 
and other internal control information. It is important to back up 
the data, e.g. when the hard disk is replaced.

Copy Print

For the Stoll technician only

Copy Report

The operating data are saved with the STOLL machine number.

Copy Mc

The machine data include the machine-specific settings 
(correction values). The data will be saved in a zip-file.

When the knitting machine was shipped, the machine data was 
printed out and put on the right control cabinet.

Select language 
with next startup

With next switching on of the machine, the language selection 
appears. The setting is reset after switching on.

Keys in the "Copy service data" window

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands