Stoll CMS 730 S Operating Instructions Manual Download Page 333

Page: 333 / 468

329

Maintenance of the knitting machine

6.3 Lubricate knitting machine

6.3.13

Greasing racking device



Greasing racking device

1. Position the rear needle bed at an angle.

2. Remove the cover over the racking spindle.

3. Apply grease to the racking strip and to the sliding guidance with a

brush.

4. Grease the lubricating nipple (1) with a grease gun (Klueber Staburags

NBU 12/300 KP, ID 231 191)

Further information:



Remove needle bed or position it at an angle [-> 342]

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands