manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 182

Adjusting knitting machine  

4 

Advanced adjustments  4.2 

178

4.2.10

Adjusting basic racking correction VGK

The position of the rear needle bed relative to the front needle bed is set 
with the VGK value (factory setting).

If part of the racking device is replaced, e.g. the racking motor or the racking 
belt, the VGK value has to be set anew. During installation, make sure that 
the front and rear needle beds are opposite each other. 

The VGK value always remains saved, even if the operating system is 
imported again.

   

Setting VGK:

✔

Cast-off the stitches on both needle beds.

1. Call up "Main menu".

2. Call up the "Service" menu.

3. Call up the "Service Racking" window.

"Service Racking" window

4. Enter and confirm the value "0" in the line "VPK".

Key

Function

Call up the "Service" menu

Call up the "Service Racking" window

Confirm input

Call up "Main menu"

Keys for setting VGK value

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands