manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 209

205

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

Turning over or replacing the 

small pressure plates 

(intarsia yarn carrier type 2)

1. Dismantle yarn carrier.

Dismantling of small pressure plate

2. Remove the screws (1).

3. Remove the parts (2). Make sure that the springs (3) are not lost.

4. Lift the clamping lever (4) out of the locating pin and remove it 

downwards. Make sure that the spring pin (5) remains in the housing.

5. Check whether the thickness designation 2, 4 or 6 is visible on the built-

in small pressure plates.

6. Remove the pressure plate from the clamping lever.

7. If the marking 2, 4 or 6 is visible on the built-in small pressure plate, turn 

over the pressure plate and reinsert it.   

 - or - 

➜

If the marking is not visible, the pressure plate is already turned over. 
Replace the pressure plate by a new one with the same thickness. 
When assembling, make sure that the marking is visible.

8. Press the spring pin (5) into the housing and insert the clamping lever 

(4).

9. Insert the parts (2) and tighten the screws (1).

CAUTION

Complicated adjustment work is required when 
replacing the pressure plates!

If the various thicknesses and positions of the pressure 
plates are interchanged, complicated adjustment work is 
required to set the stopping point of the yarn carrier correctly.

➜

Do not interchange the various thicknesses and positions 
of the pressure plates!

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands