manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 83

79

3 

 

Producing with the knitting machine 

3.3  Production 

6. To save the shift data, tap the key (2).

The data will be saved on the selected data carrier. It will be saved 
on the data carrier that is set in the "Copy service data" window.

File name: STOLL machine number, date, time and the file name 
extension ".sft" (e. g. "56600101234_31_10_08_1105.sft").

7. Call up "Main menu".

Further information:

Copying service data [-> 171]

Automatic shift changeover

Once the start time and the ending time of each shift have been entered, 
the shift changeover automatically occurs after the entered time.

   

Key

Function

Call up the "Service" menu

Call up "Statistics" menu

Call up "Shift counter" window

Call up "Additional function keys"

Keys for setting the automatic shift change

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands