Stoll CMS 730 S, Operating Instructions Manual

Page: 312 / 468

Maintenance of the knitting machine
6
Cleaning the knitting machine 6.2
308

Cleaning the touch screen [-> 308]

Cleaning suction and lint container * [-> 309]

Vacuuming off knitting machine [-> 310]

Cleaning needle bed [-> 311]

Cleaning the active thread clamp [-> 311]

Cleaning the permanent brakes [-> 312]

Cleaning the friction feed wheel * [-> 312]

Cleaning main drive fan * [-> 313]

Cleaning fan and radiators in right control unit [-> 314]

Cleaning filter mat of power supply unit [-> 314]

Thoroughly cleaning needle bed [-> 315]

Clean the knitting systems [-> 317]
6.2.1 Cleaning the touch screen
Use a clean, soft cloth for cleaning. If heavy soiling is present, use a
cleaning agent suitable for plexiglas. To prevent menus and function keys
from being activated when cleaning, two options are available:

Disconnect machine main switch

Deactivate touch screen using the "Block input" key
Cleaning the touch screen:
1. Call up the "Service" menu from the "Main menu".
2. Tap the "Block input" key.
3. Clean the touch screen.
4. Reactivate the screen again after cleaning. For this purpose, trigger a
manual stop, e.g. by pushing open a cover over the needle bed.
Do not remove metallic parts and fragments (e.g. broken
needle latch or hook) with a magnetic tool. There is a danger
that the needle bed or cams can be magnetized, leading to
incorrect selection.
Key Function
Call up the "Service" menu
"Block input" key
Keys for cleaning the touch screen