manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 193

189

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

4.2.14

Adjusting needle detector

The needle detector is correctly adjusted if:

Adjusting the needle detector

it is near the holding-down jacks of the rear needle bed, however does 
not tap them

the lower end of the needle detector is at the level of the needle hooks

➜

Staggering yarn carriers. 

Further information:

Staggering yarn carriers [-> 122]

4.2.15

Adjusting yarn carriers

The yarn carriers are correctly adjusted if

the distance between the cam center of the knitting system and the yarn 
carrier in each system is identical in both carriage directions

the thread is laid on the open latch at exactly the same point by each 
yarn carrier for both selvedge needles

the yarn carrier tips move exactly between the needle beds in the 
needle cross and the distance between yarn carrier tips and the closed 
needle latch is 0.5 mm to 1 mm

the yarn carriers of the track 1 and 8 are also set 0.5 mm higher so that 
they do not touch the limiters (3)

CAUTION

Damage to the needle detector!

If several yarn carriers are stopped at the same place, the 
needle detector will be damaged, as the yarn carriers cannot 
avoid the needle detector.

➜

Always stagger yarn carriers.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands