manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 401

397

8 

 

Software - Installation and basic settings 

8.1  Boot process 

User Name

This user must be familiar with his password in the network so 
that the shared drives and folders can be used. 

Your Network administrator will create a user name and a 
password for you so that you can access the network 
resources.

Password

E-Mail

Input an e-mail address (Configure). The messages of the 
control unit are sent to this address, when the "Enable" check 
box is activated.

IP Address

Each machine (computer) should have a unique IP address 
within a network. The network protocol TCP/IP communicates 
with the individual machines by this IP address. The division 
of the network is done in the so-called network classes. An 
individual Network-address is assigned to each machine 
automatically by the program and it is displayed here.

Subnet Mask

This field is automatically filled up by the program with a value 
for the shared network 

Class B

.

Use DHCP

The DHCP (Dynamic Host Configuration Protocol) enables 
with the help of a corresponding server the dynamic allocation 
of an IP address and the further configuration parameters to 
the computers (machines) in a network.

MAC Address

Media Access Control Address.

Name

Name of the network board.

Use DNS

Domain Name Services via a DNS Server.

Enter the name of the IP address of the server, if necessary.

Use WINS

Windows Internet Name Services. 

Enter the name of the IP address of the server, if necessary. 

Gateway

A Gateway enables the connection between the shared 
networks. 

Enter the IP-Address of the active component, if necessary. 

Settings in the "Network Configuration" window, especially 
the settings for 

External LAN

, are to be done by a Network 

Administrator. The settings for 

Internal LAN

 serve 

developers purposes only and may not be altered.

The Ethernet IP addresses 

192.168.0.0

 to 

192.168.0.255

 are 

reserved for Stoll knitting machines and may not be used in 
the company network. 

The reason for this: The cards 963 (IPC) and 966 (Power 
CPU) in the knitting machine use these IP addresses to 
communicate with each other. But if both these addresses 
are used in the company network, the cards cannot work 
correctly with each other anymore and the machine does not 
function any longer.

Label

Description

Components of the "Network Configuration" window 

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands