manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 314

Maintenance of the knitting machine  

6 

Cleaning the knitting machine  6.2 

310

9. Lift the suction tube in the middle until the fixing clip is pulled out of the 

carriage.

Suction tube

10. Blow out the suction tube with compressed air.

Further information:

Symbols in this document [-> 12]

6.2.3

Vacuuming off knitting machine

1. Stop the knitting machine.

2. Vacuum fluff and dust off the knitting machine.

CAUTION

Damage to the suction tube!

The suction tube will be damaged at the coupling point of the 
suction tube and the hose if you lift it by the suction nozzle.

➜

Lift the suction tube always in the middle so that the 
coupling point "suction tube - hose" is separated.

In order to avoid any dust being deposited on the 
inaccessible points of the machine, we recommend that the 
dust should be vacuum cleaned and the machine not to be 
cleaned by compressed air.

CAUTION

Damage of needles!

The spring-mounted needle latches will be damaged if the 
needles are blown out with compressed air.

➜

Always vacuum fluff and dust off the needles, never blow 
them out.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands