manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 366

Repairing the knitting machine  

7 

Replacing parts  7.3 

362

7.3.11

Replacing yarn carrier

1. Stop the carriage assembly into the left reversing position.

Screws of the yarn carrier limiter

2. Loosen the screws (1) of the yarn carrier limiter.

3. To remove the yarn carrier limiters, turn the screws (1). The yarn carrier 

limiters can be removed and mounted in any position.

4. Shift yarn carrier to the right or left to the replacement point (A) and 

remove it.

5. Place new yarn carriers on the rails.

6. Place the yarn carrier limiters of yarn carriers on the rails, position them 

in a staggered way and screw them on tight.

7. Check the adjustment the yarn carrier.

Further information:

Adjusting yarn carriers [-> 189]

When replacing the yarn carrier bow, ensure that the punch 
mark is located on the inside when mounting shim (2).

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands