manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 35

31

2 

 

Description of knitting machine 

2.4  Knitting system 

2.4.2

Raising cams

Raising cams

There are two different raising cams for transfer and split-stitch. When the 
knitting machine is shipped, the raising cams for transfer (2) are built-in. The 
raising cams for split-stitch (3) are contained in the accessories.

1 Position of raising cam

2 Raising cam for transfer

3 Raising cam for split-stitch

The raising cam for split-stitch (3) can also be used for 
normal transfer patterns. In the case of particularly delicate 
yarns, the raising cam for transfer (2) should be used so that 
the yarn does not tear while transferring the stitches and no 
drop stitches result.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands