manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 418

Software - Installation and basic settings  

8 

Installing the Stoll operating system  8.4 

414

Start installation

✔

The Stoll operating system was updated.

✔

The machine is switched off.

1. Set the main switch to 

1

.

The "BootOkc" window is displayed with the following message on 
the touch screen:

"User Message" window (START UPDATE NOW?)

2. Deactivate the "Installation without configuration" check box, if the 

machine parameters are also to be altered simultaneously with the 
installation of the new Stoll operating system.   

 - or - 

➜

Activate the "Installation without configuration" check box, if you do not 
want to alter any machine parameters.

3. To start installation process tap on "YES".

In the "User Message" window (INSTALLATION STARTED!) the 
path to the installation data is displayed.

"User Message" window (INSTALLATION STARTED!)

4. If only the files that have got altered are to be installed anew during the 

installation deactivate the "FORCE INSTALLATION" check box 
(expedites the installation process).

To proceed with the old Stoll operating system, tap on "NO".

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands