manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 78

Producing with the knitting machine  

3 

Production  3.3 

74

Pattern changes - Apply 

shape counters

The machine compars automatically the shape counters (old-new) in order 
to e able to adjust the new knitting width (widening or narrowing) with the 
pattern change. The values of the shape counters of the previous pattern 
are necessary for this.

You can enter the values of the previous pattern manually or simply apply 
them by the "Apply shape counter" key.

The condition is that the pattern was created as Fully Fashion knitting 
program on the M1plus. 

   

Apply shape counter:

1. Call up the window "Machine start" from the "Main menu".

2. Tap on "Additional function keys".

3. Tap the "Apply shape counter" key.

Confirm the prompt that follows with "YES".

The values of the shape counter are applied to the new pattern.

4. Tap the "SP from line 1" key.

Use this function only for the following machines:

➜

Machine without comb take-down

➜

Machine with comb take-down but without using the 
comb

Also with a basic pattern (pattern without shape) you can use 
this helpful function (see the tip at the end of the section).

Key

Function

Call up "Machine start" window

Call up "Additional function keys"

"Apply shape counter" key

Keys to apply the shape counters

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands