manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 313

309

6 

 

Maintenance of the knitting machine 

6.2  Cleaning the knitting machine 

6.2.2

Cleaning suction and lint container *

1. Stop knitting machine when carriage is located on right half of needle 

bed.

2. Slide on cover over needle bed.

3. Push locking of lint container inwards and pull away container upwards.

Lint container and filter 

4. Empty the lint container.

5. Clean filter (1) of lint container.

6. Reinstate the lint container.

7. Remove left rear panel segment.

8. Clean motor cover.

Cleaning motor cover

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands