Stoll CMS 730 S Operating Instructions Manual Download Page 360

Page: 360 / 468

Repairing the knitting machine

Replacing parts 7.3

356

9. Reassemble the cam plate and carriage part in the reverse order.

Further information:



Switching power supply 40 V off and on [-> 331]



Removing and mounting carriage part [-> 348]

7.3.9

Removing and mounting step motor

Each knitting system contains a step motor which controls the stitch cam
position.

1. Remove the carriage part.

2. Remove the cam plate.



Removing step motor

3. Move defective step motor to home position: Turn the scale (2) until the

pointer (1) is positioned exactly on the zero point (3).

4. Remove the screws (4).

5. Take off the defective step motor.

CAUTION

Adjusting screws!

If adjusting screws are released, the step motor must be
readjusted at STOLL.

➜

Do not loosen any adjusting screws (5).

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands