Siemens SINUMERIK 828D Turning Operating Manual Download Page 778

Page: 778 / 940

Entry

Description

Partition

Partition number on the USB storage medium,

e.g. 1 or all.

If a USB hub is being used, then specify the

USB port of the hub.

USB path

Path to the USB hub.
Note:
This value is not currently evaluated.

Specifications for local drives

Entry

Description

Symbolic

Symbolic drive name.
Assignment of the names under Details

Additional parameters under Details
Use drive as:

LOCAL_DRIVE

The activation of the checkbox assigns the

symbolic name to the drive.
If an assignment exists already for the drive,

no change can be made.
All checkboxes are active as preassignment.

CF_CARD
SYS_DRIVE

Specifications for network drives

Entry

Description

Computer name

Logical name of the server or the IP address.

Release name

Only for network drives in

Windows systems.

Name, under which the network drive was re‐

leased

Path

Start directory.
The path is specified relative to the released

directory.

User name
Password

Enter the user name and the corresponding

password for which the directory is enabled on

the server.
The password is displayed in encoded form

as string of "*" characters and is stored in the

"logdrive.ini" file.

Symbolic

Symbolic drive name.
Maximum 12 characters can be entered (let‐

ters, digits, underscore).
The names NC, GDIR and FTP are reserved.
They are also used to label the softkey if a

softkey text is not specified.

Managing programs
14.12 Set up drives

Milling

778

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Summary of Contents for SINUMERIK 828D Turning













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK 828D Turning

Reviews:

Related manuals for SINUMERIK 828D Turning

Brands by name

Popular brands

Siemens SINUMERIK 828D Turning, Operating Manual

Search results

Summary of Contents for SINUMERIK 828D Turning

Reviews:

Related manuals for SINUMERIK 828D Turning

Brands by name

Popular brands