Parameter
Meaning
Magazine location
The magazine number is specified first, followed by the location number in the magazine.
If there is only one magazine, only the location number is displayed.
Tool name
The tool is identified by the name and the sister tool number. You can enter the name as text or
number.
ST
Sister tool number (for sister tool strategy)
D quantity
Number of created cutting edges
D
Cutting edge number
Tool state
A
Activate tool
F
Tool enabled
G
Block tool
M
Measure tool
V
Reaching the prewarning limit
W
Tool being changed
P
Tool in fixed location
The tool is permanently assigned to this magazine location
I
Tool has been in use
Tool size
Standard
Tool does not require an additional location in a magazine.
Oversize
The tool occupies two half locations left, two half locations right, one half
location top and one half location bottom in a magazine.
Special size
Left
Number of half locations to the left of the tool
Right
Number of half locations to the right of the tool
Tool OEM parameters
1 - 6
Freely available pa‐
rameters
13.9.3
Cutting edge data
The "Tool Details" window provides the following data on the selected tool when the "Cutting
edge data" softkey is active.
Parameter
Meaning
Magazine location
The magazine number is specified first, followed by the location num‐
ber in the magazine.
If there is only one magazine, only the location number is displayed.
Tool name
The tool is identified by the name and the sister tool number. You
can enter the name as text or number.
ST
Sister tool number (for sister tool strategy)
D quantity
Number of created cutting edges
D
Cutting edge number
Tool type
Tool symbol with type number
Tool management
13.9 Tool details
Milling
724
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0