Siemens SINUMERIK 828D Turning Operating Manual Download Page 419

Page: 419 / 940

Display or hide all positions at once

Press the "Hide all" softkey to hide all positions.

Press the "Show all" softkey to display all positions again.

10.1.16

Repeating positions

Function

If you want to approach positions that you have already programmed again, you can do this

quickly with the function "Repeat position".
You must specify the number of the position pattern. The cycle automatically assigns this

number (for ShopMill). You will find this position pattern number in the work plan (program

view) or G-code program after the block number.

Procedure

The part program or ShopMill program to be processed has been created

and you are in the editor.

Press the "Drilling", and "Repeat position" softkeys.
The "Repeat positions" input window opens.

After you have entered the label or the position pattern number, e.g. 1,

press the "Accept" softkey. The position pattern you have selected is then

approached again.

Parameter

Description

Unit

LAB (only for G

code)

Repeat jump label for position

Position (only for

ShopMill)

Enter the number of the position pattern

Programming technological functions (cycles)

10.1 Drilling

Milling

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

419

Summary of Contents for SINUMERIK 828D Turning













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SINUMERIK 828D Turning

Reviews:

Related manuals for SINUMERIK 828D Turning

Brands by name

Popular brands

Siemens SINUMERIK 828D Turning, Operating Manual

Search results

Summary of Contents for SINUMERIK 828D Turning

Reviews:

Related manuals for SINUMERIK 828D Turning

Brands by name

Popular brands