9.18
Example, standard machining
General
The following example is described in detail as ShopMill program. A G code program is
generated in the same way; however, some differences must be observed.
If you copy the G code program listed below, read it into the control and open it in the editor,
then you can track the individual program steps.
Machine manufacturer
Under all circumstances, observe the machine manufacturer’s instructions.
Tools
The following tools are saved in the tool manager:
Tool name
Tool diameter
Cutting materials
Number of teeth
Face miller
D80 mm
HM
Z = 8
End mill
D20 mm
HM
Z = 3
End mill
D10 mm
HM
Z = 3
End mill
D8 mm
HM
Z = 3
Centering tool
(NC spotdrill)
D10 mm
HM
-
Twist drill
D10 mm
HSS
-
The correction (compensation) values for length and radius as well as the tip angle for drills
and number of teeth for milling tools should be entered into the tool list. If you are working with
ShopMill, in addition, enter the spindle direction of rotation and coolant.
Adapt the cutting data to the tools used and the specific application conditions.
Blank
Dimensions: 185 x 185 x 50
Material: Aluminum
Creating a ShopMill program
9.18 Example, standard machining
Milling
354
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
