Parameter
Description
Unit
C1
(for ShopMill pro‐
gram)
The required angle can be freely entered
Degrees
αC
(for ShopMill pro‐
gram)
Rotational position for a pole position
Degrees
Hirth joint
● Round to the next Hirth joint
● Round up to Hirth joint
● Round down to Hirth joint
Note:
For machines with a Hirth joint
Tool
Tool tip when swiveling
● Tracking
The position of the tool tip is maintained during swiveling.
● No tracking
The position of the tool tip is not maintained during swiveling.
Preferred direction
(for ShopMill pro‐
gram)
Preferred direction of the swivel axis for several possible alignments of the machine
Machining
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇+∇∇∇ (complete machining)
Machining
direction
● Face
● Longitudinal
Position
● front
● back
● inside
● outside
D
Maximum depth infeed - (only for ∇)
mm
XDA
First grooving limit tool (abs) – (only for face machining direction)
mm
XDB
Second grooving limit tool (abs) – (only for face machining direction)
mm
UX or U
Finishing allowance in X or finishing allowance in X and Z – (only for ∇)
mm
UZ
Finishing allowance in Z – (only for UX)
mm
Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
611