Procedure
1.
Select the "Machine" operating area and press the <JOG> key.
2.
Press the "Workpiece zero" softkey.
3.
Press the "Rectangular pocket" softkey.
- OR -
Press the "1 hole" softkey.
- OR -
If these softkeys are not listed, press any vertical softkey (with the excep‐
tion of "Set edge") and in the drop-down list, select the desired measure‐
ment version.
4.
Select "Measuring only" if you only want to display the measured values.
- OR -
5.
In the selection box, select the desired work offset in which you want to
store the zero point.
- OR -
Press the "Select WO" softkey to select a settable work offset.
In the window "Work Offset – G54 ... G599", select a work offset, in which
the zero point should be saved and press the "In manual" softkey.
You return to the measurement window.
6.
Specify the position setpoints (X0/Y0) of the pocket center point or hole
center point.
7.
Traverse the tool to the first/next measuring point if you are measuring
manually.
8.
Press the "Save P1" softkey.
The point is measured and stored.
Setting up the machine
4.6 Measuring the workpiece zero
Milling
128
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
