Installation der Geräte III
Installation of the Equipment III
Rentschler REVEN GmbH delivers its products free on site as a rule (with the exception of islands
and mountains). Therefore, make sure that the necessary hoisting equipment and personnel
are available.
You can transport the extractor hoods with the help of a rolling cart or a mobile
elevating platform. Make sure that the recommended transport positions are observed.
➜
You can transport the extractor hoods either
with the longer lateral face or the rear face on bottom.
The edge protections fitted in the REVEN factory are made of sturdy natural cardboard and can be
recycled. You can either turn them over to the truck driver free of charge in accordance with relevant
packaging directives or send them back to the REVEN factory. Shipment costs are at your
charge in this case.
Check the incoming goods for damages such as dents and scratches on the surface and make sure
that they comply with the bill of lading. This is especially recommended for accessory parts
such as X-CYCLONE® aerosol separators, drain valves, suspensions, sockets etc.
➜
Subsequent complaints because of incomplete
delivery or damage of the goods are excluded.
Fig.: transport position, supported on the longitudinal side
49
