Getting started
R&S
®
SMM100A
58
User Manual 1179.1341.02 ─ 05
Figure 3-14: Simplified representation of a test setup for signal monitoring**
** = The figure depicts the cabling as a general principle
4. Use a suitable cable to connect the
connector of the R&S
SMM100A to the
monitoring instrument.
To learn more about this topic, refer to
Chapter 4.4.1.2, "Regular marker output sig-
3.3.5
Verifying the generated signal with the graphics display
It is often useful to check the spectra of the configured signals, before you enable the
RF output of the instrument.
The R&S
SMM100A provides a build-in function to represent the generated signal on a
graphical signal display. We demonstrate this feature by showing the characteristics at
one particular point of the signal processing chain. You can, however, display the sig-
nal characteristics at other different stages.
This example shows you how to use this graphical display to verify the generated sig-
nal. Use the signal generated in
Chapter 3.3.4, "Enabling and configuring a marker sig-
To access the graphical signal display functionality
► Perform one of the following:
Trying out the instrument