Rohde & Schwarz SMM100A, User Manual

Page: 786 / 1088

Remote control commands
R&S
®
SMM100A
786 User Manual 1179.1341.02 ─ 05
Parameters:
<Delay> float
Range:
0 to depends on the symbol rate
Increment: 0.01
*RST:
0
Default unit: symbol
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772.
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 112
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:TDELay <ExtTimeDelay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values" on page 101.
Parameters:
<ExtTimeDelay> float
Range:
0 to 7929.170398682
Increment: 0.25E-9
*RST:
0
Default unit: s
Example: See Example "Specifying delay and inhibit values in time units"
on page 798.
Manual operation: See "(Specified) External Delay/(Specified) Trigger Delay"
on page 112
[:SOURce<hw>]:BB:DM:TRIGger[:EXTernal]:RDELay?
Queries the time (in seconds) an external trigger event is delayed for.
Return values:
<ResTimeDelaySec> float
Range: 0 to 688
Increment: 0.25E-9
*RST:
0
Example: See Example "Specifying delay and inhibit values in time units"
on page 798
Usage: Query only
Manual operation: See "Actual Trigger Delay/Actual External Delay" on page 112
SOURce subsystem