Configuring the RF signal
R&S
®
SMM100A
353
User Manual 1179.1341.02 ─ 05
The editor for user correction data provides a table with RF frequency and power
values and standard navigation functions.
The remote commands required to define the user correction data are described in
Chapter 13.16.5, "SOURce:CORRection subsystem"
All columns in a row must contain values. Cells with missing values are therefore filled
automatically, using the value of the previous row.
If you use
global dwell time in list mode
, consider also that the instrument uses the
for all list steps and not the values from the list.
Since the table and navigation functions can be assumed to be known, the following
description contains a brief overview, shown by the example of the "Edit List Mdoe
Data" dialog. If a function relates to a particular dialog, it is explicitly stated.
Settings
..............................................................................................354
............................................................................................... 354
Edit List Mode Data
Table with values for list or user correction processing.
Note:
Once you enter a value, the editor automatically adds preset values in the other
columns. This functionality protects against data loss, otherwise incomplete rows are
lost when saving. You can simply override these values.
"Frequency /Hz"
Sets the frequency values.
Remote command:
[:SOURce<hw>]:CORRection:CSET:DATA:FREQuency
"Power /dBm" (list mode data table)
Sets the level values.
Remote command:
"Correction Value /dBm" (user correction data table)
Sets the level values.
Remote command:
[:SOURce<hw>]:CORRection:CSET:DATA:POWer
"Dwell /s"
In list mode, sets the dwell time values.
Remote command:
Varying the RF signal in list or sweep mode