Rohde & Schwarz SMM100A, User Manual

Page: 908 / 1088

Remote control commands
R&S
®
SMM100A
908 User Manual 1179.1341.02 ─ 05
Parameters:
<Voltage> float
Range:
dynamic (see data sheet)
Increment: 0.001
*RST:
1
Default unit: V
Example:
SOURce:LFOutput1:VOLTage 1.5
Manual operation: See "Output Voltage" on page 382
[:SOURce<hw>]:LFOutput<ch>:SHAPe <Shape>
Selects the waveform shape of the LF signal.
Parameters:
<Shape> SINE | SQUare | PULSe | TRIangle | TRAPeze
*RST:
SINE
Example: See Example "Configuring the LF generator" on page 903.
Options: TRIangle|TRAPeze require R&S SMM-K24
Manual operation: See "Shape" on page 377
[:SOURce<hw>]:LFOutput<ch>:SHAPe:PULSe:DCYCle <DCycle>
Sets the duty cycle for the shape pulse.
Parameters:
<DCycle> float
Range:
1E-6 to 100
Increment: 1E-6
*RST:
50
Default unit: PCT
Example: See Example "Configuring the LF generator" on page 903.
Manual operation: See "Pulse Duty Cycle" on page 378
[:SOURce<hw>]:LFOutput<ch>:SHAPe:PULSe:PERiod <Period>
Sets the period of the generated pulse. The period determines the repetition frequency
of the internal signal.
Parameters:
<Period> float
Range:
1E-6 to 100
Increment: 1E-8
*RST:
1E-3
Example: See Example "Configuring the LF generator" on page 903.
SOURce subsystem