Remote control commands
R&S
®
SMM100A
707
User Manual 1179.1341.02 ─ 05
Manual operation:
See
:SENSe<ch>[:POWer]:CORRection:SPDevice:STATe
<State>
Activates the use of the S-parameter correction data.
Note:
If you use power sensors with attenuator, the instrument automatically activates
the use of S-parameter data.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Example:
:SENSe1:POWer:CORRection:SPDevice:STATe 1
Activates the use of the S-parameters correction data.
Manual operation:
See
:SENSe<ch>[:POWer]:CORRection:SPDevice:LIST?
Queries the list of the S-parameter data sets that have been loaded to the power sen-
sor.
Return values:
<List>
string list
*RST:
0
Usage:
Query only
Manual operation:
See
:SENSe<ch>[:POWer]:DISPlay:PERManent:PRIority
<Priority>
Selects average or peak power for permanent display.
Parameters:
<Priority>
AVERage | PEAK
*RST:
AVERage
Example:
:SENS1:DISP:PERM:STAT ON
Turns on the permanent view.
:SENS1:DISP:PERM:PRI AVER
Sets the average power for display.
Manual operation:
See
:SENSe<ch>[:POWer]:DISPlay:PERManent:STATe
<State>
Activates the permanent display of the measured power level results. The instrument
also indicates the sensor type, the connection, the measurement source and the offset
if set.
SENSe, READ, INITiate and SLISt subsystems
