Configuring the internal baseband source
R&S
®
SMM100A
165
User Manual 1179.1341.02 ─ 05
6. In the block diagram, select "ARB Sig Gen" block and select the R&S
SMM100A
form the list.
The two lines to the "Vector Sig Gen" and "ARB Sig Gen" blocks on the block dia-
gram confirm that a remote connection to the R&S
SMM100A is established.
To generate a waveform file with R&S
WinIQSIM2
1. In the block diagram of R&S WinIQSIM2, select "Baseband > EUTRA/LTE/IoT".
2. Adjust the settings as required, for example:
a) Select "Link Direction > Downlink (OFDMA)"
b) Select a predefined test model, for example, "Test Models > E-
TM1_1__10MHz".
3. Enable "EUTRA/LTE/IoT > State > On".
The R&S WinIQSIM2 calculates the signal and displays important signal parame-
ters, like the used "Sample Rate" and "Number of Samples".
Using the arbitrary waveform generator (ARB)