Rohde & Schwarz SMM100A, User Manual

Page: 788 / 1088

Remote control commands
R&S
®
SMM100A
788 User Manual 1179.1341.02 ─ 05
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PATTern <Pattern>, <BitCount>
Defines the bit pattern used to generate the marker signal.
Parameters:
<Pattern> numeric
*RST:
#H2
<BitCount> integer
0 = marker off, 1 = marker on
Range:
1 to 64
*RST: 2
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772.
Manual operation: See "Marker Mode" on page 113
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PULSe:DIVider <Divider>
Sets the divider for pulse marker mode (
PULSe
).
Parameters:
<Divider> integer
Range:
2 to 1024
*RST: 2
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772
Manual operation: See "Marker Mode" on page 113
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:PULSe:FREQuency?
Queries the pulse frequency of the pulsed marker signal
PULSe
.
Return values:
<Frequency> float
Example: See Example "Adjusting clock, marker and trigger settings"
on page 772
Usage: Query only
Manual operation: See "Marker Mode" on page 113
[:SOURce<hw>]:BB:DM:TRIGger:OUTPut<ch>:DELay <Delay>
Defines the delay between the signal on the marker outputs and the start of the signal,
expressed in terms of symbols.
SOURce subsystem